Staf pengajar dalam program studi Teknik Industri Universitas Bakrie telah banyak mempublikasikan karya ilmiahnya di jurnal dan seminar ilmiah baik dalam skala nasional maupun internasional. Berikut karya-karya ilmiah yang telah dihasilkan oleh para dosen dalam prodi Teknik Industri:

2016

Susanto, T., Djamaris, A.R.A., dan Azkia, N. (2016), “Analysis on Order Processing Function to Reduce Processing Time in Indonesian Context”, International Journal of Research in Management and Technology, Vol. 6 No. 3.

Anwar, R. dan Adidarma, W. (2016), “Pengaruh Kepercayaan dan Risiko pada Minat Beli Belanja Online”, Jurnal Manajemen dan Bisnis Sriwijaya, Vol. 14 No. 2.

Budipriyato, A., Wirjodirdjo, B., Pujawan, N. dan Gurning, S. (2016), “Berth allocation problem under uncertainty : Preliminary study at Koja Container Terminal, Prosiding International, 2016, Penyaji.”, 6th International Conference on Operations and Supply Management, Phuket, 2016.

2015

Adidarma, W. (2015), “Strategi Produk untuk Mengatasi Hambatan Ekspor UKM Industri Kerajinan Indonesia”, Jurnal Manajemen dan Bisnis Sriwijaya, Vol. 13 No. 1.

Budipriyanto, A., Wirjodirdjo, B., Pujawan, N. dan Gurning, S. (2015), “Berth allocation problem under uncertainty: A conceptual model using collaborative approach”, Industrial Engineering and Service Science, Procedia Manufacturing 4 pp. 429-437.

Manurung, Y.H.P., Sulaiman, M.S., Abas, S.K., Tham, G., dan Haruman, E. (2014), “Investigation on Welding Distortion of Combined Butt and T-Joints with 9-mm Thickness using FEM and Experiment”, The International Journal of Advanced Manafucturing Technology, Vol.77 Number 5-8.

2014

Budipriyanto, A. Wirjodirdjo, B., Pujawan, N. Gurning, S. (2014), “Framework For Collaboration Among Portstakeholders: Literature Review And Case Study” , 6th International Conference on Operations and Supply Chain Management, Bali 2014.

Adenan, M.S., Berhan, M.N., dan Haruman, E. (2014), “Formation of Expanded Austenite using Hybrid Low Temperature Thermochemical Heat Treatment on 2205 Duplex Stainless Steel”, Advanced Materials Research, Vol 970, pp 244-247.

Adenan, M.S., Berhan, M.N., dan Haruman, E. (2014), “Surface Modification of 2205 Duplex Stainless Steel by Low Temperature Thermochemical Hybrid Heat Treatment at 450° C”, Advanced Materials Research, Vol 845, pp 408-411.

Susanto, T. (2014), “Analisa Penetapan Faktor Tujuan Terhadap Pencapaian Kinerja pada Perusahaan Securitas lokal”, Quality Jurnal Manajemen dan Akuntansi untuk Meningkatkan Kualitas SDM, Vol. 2 No. 11.

Susanto, T. (2014), “Kajian Pengiriman Part dari Supplier sebagai Kegiatan External Logistik PT. ADM dengan sistem Milk-Run”, Quality Jurnal Manajemen dan Akuntansi untuk Meningkatkan Kualitas SDM, Vol. 4 No. 16.

Susanto, T. dan Hatta, H. (2014), “Kendala Manajemen Dalam Budidaya Tanaman Nyamplung Sebagai Bahan Produk Energi Terbarukan (Biodiesel) Di Jawa Barat”, Jurnal Ekonomi Vol. 19 No. 02.

Anujuprana, A.H., Hartono, G., dan Santoso, E. (2014), “Farmer’s Technology Capability Model Through Farmer Own Enterprises”, European Journal of Business and Management, Vol. 7 No. 13.

2013

Lidam, R.N.k Manurung, Y.H.P., Haruman, E., Redza, M.R., Sulaiman, M.S., Zakaria, M.Y., Tham, G., Abas, S.K. Chau C.Y. (2013). “Angular distortion analysis of the multi-pass welding process on combined joint types using thermo-elastic–plastic FEM with experimental validation”, International Journal of Advanced Manufacturing Technology, Vol 69: 2373-2386.

Sedyowidodo, U. dan Susanto, T. (2013), “Analisa Pengaruh Pemikiran Kreatif dan Perilaku Inovatif Terhadap Kinerja SDM dengan Metoda SEM”, Jurnal Manajemen, Vol 17 (3).

Susanto, T., Djamaris, A. dan Hermiyetti (2013), “Analisis dan Simulasi Sistem Antrian Bus Rapid Transit (BRT) TransJakarta pada Halte Transit BNN”, Quality Jurnal Manajemen dan Akuntansi untuk Meningkatkan Kualitas SDM, Vol II (10).

Susanto, T. (2013), “Faktor-faktor keadilan prosedural mempengaruhi perilaku retaliasi”, Jurnal Manajemen Universitas Tarumanagara.

Setiawan, A.G., Herawan, D., dan Bintoro, B.P.K. (2013),” Application of Analytic Network Process in the Performance Evaluation of Local Black Soybean Supply to Unilever Indonesia’s Soy sauce Product”, The 12th International Symposium on AHP/ANP, Kualalumpur, Malaysia, 2013.

Setiawan, A.G., Herawan, D., dan Bintoro, B.P.K. (2013),” Application of Analytic Network Process in the Performance Evaluation of Local Black Soybean Supply to Unilever Indonesia’s Soy sauce Product”, Creative Decision Foundation, Pittsburg USA, in Collaboration with International Islamic University Malaysia Google Scholar.

Tahun 2012

Djamaris,  A.R.A dan Priyanto, A.B.(2012), “Strategi Pemilihan Transporter dan Jenis Truk menggunakan Linear Programming Model”, Business and Management Review 1 (2).

Djamaris, A.R.A., Priyanto, A.B., dan  Jie, F. (2012), “Implementation of E-Learning System Readiness: Indonesia Context”, dipresentasikan dalam International Conference on Management of Innovation and Technology 2012 .

Djamaris, A.R.A., Priyanto, A. B., and Jie, F., “Strategy of Selection of Transporter and Truck Types using Linear Programming Model on XYZ Company: Indonesia Context”, dipersentasikan dalam 10th ANZAM Operation, Supply Chain and Services Management Symposium 2012.

Glass, S.R., Djamaris, A.R.A., Priyanto, A.B., dan  Jie, F. (2012), “Workplace Utilization of Participative Observation and In-depth Interviewing”, dipresentasikan dalam SIBR Conference on Interdisciplinary Business and Economics Research 2012.

Wiraatmadja, E.H., Novianti, M.D., dan Adidarma, W. (2012),”Kajian Dampak Pengolahan Limbah Plastik pada Kelestarian Lingkungan dan Pertumbuhan Industri Kemasan di Provinsi DKI Jakarta Raya”, dipresentasikan dalam Seminar Internal Universitas Bakrie, Jakarta 2012.

Wiraatmadja, E.H. (2012), “Simulation and Experimental Study on Distortion of Butt and T-joints”, Journal of Mechanical Science and Technology, vol. 25(10), pp. 2641-2646, Springer, SA.

Wiraatmadja, E.H.(2012), “Model development for Quality Features of Resistance Spot Welding Using Multi-objective Taguchi Method and Response Surface Methodology”, Journal of Intelligent Manufacturing, DOI 10.1007/s10845-012-0648-3 pp 1-11, Springer, USA.

Wiraatmadja, E.H.(2012), “Development of Stand Application Tool for Analyzing and Reporting Captured by Focused Radiography using MATLAB-based GUI”, Journal of Applied Science, ISSN 1812-5654 / DO: 10.3923/ jas. 2012 pp. 1-16, Asian Network for Scientific Information.

Wiraatmadja, E.H.(2012), “Optimization and Modeling of spot Welding Parameters with Simultaneous Multiple Response Consideration using Multi-objective Taguchi Method and RSM”, Journal of Mechanical Sci. and Technology, vol. 6(28), pp. 1-6, Springer, USA.

Wiraatmadja, E.H.(2012), “Investigation on Weld Induced Distortion of Butt Joint using a Local/Global Simulation Approach”, Advanced Materials Research, Vol. 576 (2012) pp. 189-192 Trans Tech Publication, Switzerland.

Wiraatmadja, E.H.(2012), “Structural Development of Expanded Austenite on Duplex Stainless Steel by Low Temperature Thermochemical Nitriding Process”, Advanced Materials Research, Vol. 576 (2012) pp 260-263 Trans Tech Publication, Switzerland.

Wiraatmadja, E.H.(2012), “Simulation Study on Multipassed Welding Distortion of Combined Joint Types using Thermo Elastic-Plastic FEM”, The Journal of Engineering  Research, Vol. 9, No. 2, pp. 1-16, Germany.

Wiraatmadja, E.H.(2012), “Simulation Study on Multipassed Welding Distortion of Combined Joint Types using ThermoElastic-Plastic FEM”, The Journal of Engineering  Research, Vol. 9, No. 2, pp. 64-79, Germany.

Wiraatmadja, E.H.(2012), “An Investigation of Expanded Formation on Duplex Stainless Steels Treated by Low Temperature Carburizing in a Tube Furnace Atmosphere”, dipresentasikan dalam MAMIP, 23-24 Maret, 2012, Conference USM, Penang, Malaysia.

Wiraatmadja, E.H.(2012), “Structural Development of Expanded Austenite on Duplex Stainless Steel by Low Temperature Thermochemical Nitriding Process”,dipresentasikan dalam  ICAMME 2012, 3-5 Juli 2012, IIUM, Kuala Lumpur, Malaysia.

Tahun 2011

Hartono, G. dan Silda, M. (2011), “Analisis Penerapan Sistem Manajemen Keselamatan Kerja dan Kesehatan Kerja pada Bagian Automotive Component (AC) pada PT. X”, INASEA Journal, Vol.12 (1), pp.88-96

Wiraatmadja, E.H.(2011), “Investigation on Weld Nugget and HAZ Development of Resistance Spot Welding Using SYSWELD’S Customized Electrode Mashing and Experimental Verification”, Asian Journal of Industrial Engineering, Science Alert, vol. 2, 2010, ISSN 1996-3386.

Wiraatmadja, E.H.(2011), “A Feasibility Study on Low Temp. Thermochemical Treatments of Fluidized Bed Furnace”,  High Temperature Materials And Processes, De Gruyter, Germany, vol.1, no. 2, pp. 23-29

Wiraatmadja, E.H.(2011), “Structural and Properties Development of Expanded Austenite Layers on AISI 316L after Low Temperature Thermochemical Treatments”,  Journal of Applied Sciences, Science Alert, Asian Network,ISSN 1812-5662, vol. 11, no. 9 pp. 1536-1543

Wiraatmadja, E.H.(2011), “Investigation on Transverse-sectioned Nugget and HAZ Development of Multipulsed Resistance Seam Welding using SYSWELD’s Customized Electrode Meshing”, Journal of Mechanical Sci. And Technology, Springer, USA.Submitted manuscript under Review.

Wiraatmadja, E.H.(2011), “Effect of Electrochemical Potential on Tribrocorrosion Behavior of Low Temperature Plasma Carburised 316L Stainless Steel in 1M H2SO4 Solution”, Surface and Coating Technology, Elsevier, UK, vol 205, issues 17-18, pp. 4280-4290.

Wiraatmadja, E.H.(2011), “An Investigation on Low-Temperature Thermochemical Treatments of Austenitic Stainless Steel in Fluidized Bed Furnace”, Journal of Materials Engineering and Performance, ASM-International, Springer, USA, online version, 2011 DOI: 10.1007/s11665-011-9927-y.

Wiraatmadja, E.H.(2011), “Angular Distortion Analysis on Multipassed Welding of Combined Joint Types using Thermo- Elastic-Plastic FEMR”, Advanced Materials Research Vols. 314-316 (2011) pp. 327-330 Trans Tech Publications, Switzerland.

Wiraatmadja, E.H.(2011), “Investigation on Weld Induced Distortion of Butt and T-Joints using Thermo-Elastic-FEM and Experimental Study”, Advanced Materials Research Vols. 314-316 (2011) pp. 315-318 Trans Tech Publications, Switzerland.

Wiraatmadja, E.H. (2011), “Tribrocorrosion Behaviour of Low Temperature Plasma Carburised 316L Stainless steel in 0.5 M NaCl”, Corrosion Science, Article in Press (doi:10.1016/j.corsci.2011. 08. 021), Elsevier.

Wiraatmadja, E.H.dan Novianti, M.D.(2011), “Review on Materials Selection Process and Its Considerations : A Case in Biomedical Application”,11th National Conference of Indonesian Ergonomic Society 2011, Vol.1, 2011, ISSN: 2088-9488.

Tahun 2010

Wiraatmadja, E.H.(2010), “Review on Research Progress of Low Temperature Surface Heat Treatment of Stainless Steels”,dipresentasikan dalam ICAME 2010,  8 - 10 December 2010, Universiti  Teknologi MARA, Shah Alam, Malaysia.

Hartono, G., Putro, T.N., Farhan, F. dan Fitrianingtyas, R. (2010), “Analisis Kinerja Proses dan Produk dengan Pendekatan Metodologi Six Sigma (DMIAC) untuk Produk Teh Botol pada PT. XYZ”, INASEA Journal, Vol. 11(1), pp. 58-69, 2010.

Hartono, G. dan Riki Yulizami (2010), “Analysis Area Moved Cracked Sleeve Defects in Die Casting Process with Six Sigma Methodology in PT. XYZ”, Seminar Nasional, Riset dan Teknologi Terapan.

Hartono, G. dan Puteri Hapsari, “Analysis of Product Quality Control Panel Body Side Outer RH And Preventive Maintenance at PT. XYZ”, Seminar Nasional Efisiensi Energi untuk Peningkatan Daya Saing Industri Manufaktur dan Otomotif Nasional 2010.

Adidarma, W. (2010), “Strategi Produk untuk Mengatasi Hambatan Ekspor UKM Industri Kerajinan Indonesia”, dipresentasikan dalam4thPPM National Conference on Management Research, 25 November 2010, STM PPM, Jakarta, Indonesia. 

Sebelum Tahun 2010

Wismiarsi, T., Adidarma, W., dan Hatta, H. (2009), “Networking and Internationalization of Small Firms in Indonesia”, Jurnal Manajemen dan Bisnis Sriwijaya, 7 (14): 81-90, Program Pasca Sarjana, Program Studi Magister Manajemen Universitas Sriwijaya.

Wismiarsi, T., Adidarma, W., dan Hatta, H. (2009), “Entrepreneurial Marketing: Networking and Internationalization of Small Firms”, dipresentasikan dalam Indonesian Conference on Innovation Entrepreneurship, and Small Business (ICIES), 22-23 Juli 2009, School of Business and Management, ITB Bandung.

Hartono, G. dan Agus Riyadi (2009), “Biaya dan Manfaat Pengadaan Program Astra Daihatsu Production Planning System (ADPPS) di PT. ADM”, INASEA Journal, Vol. 10(2), pp. 112-124.

Hartono, G., Prajadhiana, D. dan Nurhidayat, S. (2009), “Implementing Value Stream Mapping (VSM) on Production Process of Blank Cylender Head at PT. X”, INASEA Journal, Vol. 10(1), pp. 1-7.

Hartono, G. dan Amri (2009), “Six Sigma Methodology Application for Long-Pasta Product Quality Improvement in PT. XYZ”, The International Industrial Informatics Seminar 2009.

Hartono, G. dan Pratama, A. J. (2009), “The Application of Concurrent Engineering Method Supported by Virtual Prototype Based CAD (Computer Aided Design) and CAE (Computer Aided Engineering)”, The International “Industrial Informatics Seminar 2009.

Hartono, G. dan Sutanto, F. A. (2008), “Implementasi Prinsip Kerja 5S pada Bagian Fabrikasi I untuk Meningkatkan Efisiensi Waktu Produksi”, INASEA Journal, Vol. 9(2), pp. 103-112.

Hartono, G. dan Lianawati, K. (2008), “Rancangan Model Optimasi Laba Produk Selsun Shampoo Menggunakan Metode Simpleks di PT. AI” with Kiki Lianawaty. INASEA Journal, Vol. 9(1), pp. 38-46.

Adidarma, W. dan Wismiarsi, T. (2008), “Export Barriers, Marketing Strategy, and Export Performance of Indonesia SMES”, dipresentasikan dalam 3rd ICBMR and 14th Euro-Asia Conference, 27-29 Agustus 2008, Universitas Indonesia, Bali, Indonesia.

Wismiarsi, T., Shihab, M.S., dan Adidarma, W.(2008), “Hambatan Ekspor UKM Indonesia – Hasil Studi pada Industri Mebel, Kerajinan, dan Biofarmaka”, diterbitkan oleh Kompas, November 2008.